1. Preparatory activities
2. Direct wire connection
3. Using a router connected by cable internet connection
4. Via Wi-Fi router
5. With the use of the mobile network operator

Instruction

To begin, configure on the server. Log in to the server via account administrator or owner. Click on “Start”, then “Control Panel”, click on “Network and Internet connections”, and check the box “ Network connections ". Right-click on the connection you want to use to access the Internet. Click the "Properties" tab, then "Advanced", mark there "Internet Connection Sharing".
Now in the tab "Allow other network users to use the Internet connection this computer »Check the appropriate box. If you use remote access , select the checkbox “Set call on demand”. Click OK, then click Yes.

Continue tuning on the client computer. To connect to a computer through a shared connection, you need to check the IP settings for network card local network and then configure the client computer. To check the IP settings, follow these steps.
Log on to the client computer through an administrator or owner account. Click "Start", then "Control Panel", then select "Network and Internet connections", then select "Network Connections". Right-click the "Local Area Connection" option, and then select the "Properties" command.
In the "General" tab, find the following parameter - "Internet Protocol (TCP / IP)", which is in the "Components Used by this Connection" list. Click on the "Properties" button. Check the box for “Obtain an IP address automatically.”

Troubleshoot problems that may occur when connecting through sharing. This can occur due to the fact that during the use of a shared access when connecting to the Internet, the local network is most often assigned the IP address 192.168.0.1. To eliminate the address conflict, configure client computers to dynamically obtain an IP address or assign a unique IP to each.

The modern world is unthinkable without the Internet. With the help of the Internet, we work, learn, communicate and have fun. We can find almost any information using only a search engine. In order to be able to connect to the Internet anywhere, you need to know what methods of connecting to the Internet exist.

Today there are almost no people left in the world who would not use the possibilities of the Internet. Therefore, the relevance of the issue of how to independently connect the Internet to a personal computer is growing every day. A PC that is not connected to the World Wide Web turns into an ordinary typewriter with calculator functions, i.e., most of the advantages of owning such a computer are simply lost. Below is a guide to how to connect your computer to the Internet, as well as step-by-step instruction how to set up the Internet, without resorting to the services of specialists.

Preparatory activities

To connect to the Internet, first of all, you need to choose the best Internet source for the specific conditions of the user: direct connection (connect the Internet to the computer via cable), Wi-Fi router, SIM card of mobile operator, satellite connection, PBX. Then, if necessary, sign a contract with the service provider, which is called the "Provider".

He will provide his subscriber the necessary means, for example, a modem or router, cable. If it is a cellular carrier, then a special USB-modem, which is inserted into the USB port of the computer.

Direct wire connection

The method has a number of significant advantages, but not without major shortcomings, which can be decisive when a user chooses a connection method. It is very simple to implement and requires the lowest cost. However, the Internet provider must extend the wire directly to the computer, which is not always possible and convenient. The cable must be connected to the network card of the PC.

After that, you need to configure the Internet in the computer. The input parameters vary depending on the service provider company and the connection technology itself. The essence of the procedure is to create a connection with authorization. The following is an example of step-by-step actions in a PC with an operating windows system 8. In other operating systems supported by Microsoft, the procedure is similar.

The following consecutive steps are required:

For Windows XP, you can briefly present a similar algorithm of actions in the form of the following chain:

1. Start;
2. Network connections;
3. Create a new connection;
4. New Connection Wizard;
5. Connect to the Internet;
6. Establish a manual connection;
7. High speed connectivity;
8. Entering parameters from an internet provider.

For Windows 7:

1. Start;
2. Control Panel;
3. Network and Internet;
4. Network Control Center and shared ;
5. Setting up a new connection or network;
6. Internet connection;
7. High speed;
8. Entering parameters from your service provider.

Using a router connected by cable internet connection

This is a more convenient option for home or office, as it allows you to connect more than one PC to global network , and at the same time several, thereby creating a local network. Today, rarely anyone in the apartment or office has only one computer.

In the router's WAN port, insert the cable from the provider. Connect the computers using LAN patch cables via LAN connectors. Enter the provider settings through the web interface launched in the computer’s browser by entering the address written in the router’s instruction manual (usually 192.168.1.1).

Via Wi-Fi router

Using wireless router Actions will be similar to the previous instructions, but you will need to configure WiFi. If the computer does not have a Wi-Fi adapter, you will need to purchase and install it.

On the example of Windows 8, to connect a computer via Wi-Fi, you need to do the following:

With the use of the mobile network operator

Despite the relatively slow data transfer, this option is very popular among users due to its high mobility. Just insert the USB-modem into the appropriate port of the computer, and the configuration will be done almost automatically, the client will only need to follow the instructions of the setup wizard.

The laptop has long ceased to be a luxury - it is a tool for work, leisure and entertainment. Many have already managed to appreciate and fall in love with this wonderful device, for some it has become a full-fledged replacement for a desktop PC.

If you connect a laptop to the Internet - it will be able to unleash its potential even more. And it pleases. Today we consider several options "how to connect a laptop to the Internet." Are you ready? Let's start.

Option 1. How to connect a laptop to the Internet using Wi-Fi.
This is one of the easiest ways to connect. Most modern laptops are equipped with Wi-Fi module. If you are in range Wi-Fi networks - the connection can be made in the following way:

• We turn on the Wi-Fi module on the laptop;
• Go Start / Connect, find and click Wireless Network Connection;
• Select the network to which you want to connect;
• Double click on the selected network - and we are connected. If the network is protected - you will need to enter a password (check with the administrator / owner of the network);
• When establishing a connection, you get full Internet access.

If the Wi-Fi module is not available - it is possible to purchase and install a USB Wi-Fi miniature module can be a full replacement for the missing / non-working equipment on a laptop.

Option 2. How to connect a laptop to the Internet using a USB modem *.
Now enjoy "popular love" USB modems with which you can go online. This access option is interesting if available good coverage and adequate tariff rates. If desired, you can find providers that provide Mobile Internet complete with 3G modem. Depending on the equipment and service provider, the connection procedure may vary.

In some cases, providers set up a connection for free in their service center, sometimes you can meet special programs that automatically install hardware drivers, create a connection and configure Internet access settings. Not excluded the option in which you have to connect and configure the USB modem yourself. As it usually happens:

• Insert the SIM card into a USB modem;
• Insert the USB modem into USB port on a laptop;
• The system will detect a new device (during the installation process, you must select a language);
• We agree with the License Agreement and the installation site of the program;
• After the installation is completed, click "Finish";
• The program will start automatically. If not, run it in manual mode and enter the pin code (written on the card for the sim card);
• The program is ready to work. Click "Connect to ...". After creating a connection, we can use the Internet.

* Connection diagram may vary depending on the equipment used and the provider (service provider).

Option 3. How to connect a laptop to the Internet via cable, using a network card *.
Imagine that you have already come to the master, involved in connecting subscribers. They ran the cable, checked the connection and plugged the cable into the network card slot. It remains only to configure:

1. Go to the Start menu, then select the Control Panel;
2. Find and click there you need to select Local Area Connection and double-click on it with the left mouse button;
3. Then select and click Properties, in the list we need TCP / IP Protocol, then click Properties again;
4. Finally we got to the destination. If the provider provides automatic settings - choose “Get automatically” for IP and for DNS server. Pressing the OK button will complete the settings of the network card. All settings are complete. Welcome to the world of the Internet.
5. ** If the provider does not provide automatic settings, select “Use the following IP” and manually “drive in” the IP, Mask and Default gateway.
6. The next step is to register the primary and alternate addresses for the DNS server;
7. After clicking OK, the entered settings are recorded. Internet connection will be made automatically when you turn on the laptop.

* Depending on the service provider, the description of the settings may vary.
** The data that is required for the network card settings, check with the provider (service provider).

Ignore the seeming complexity of the connection settings. After you make the settings at least once - everything will fall into place. After several trial connections, you can easily set up Internet access not only for yourself, but also for all “technically hopeless” acquaintances. Congratulations: now you know as many as three answers to the tricky question "how to connect a laptop to the Internet."

A large list of advantages that modern laptops have in comparison with PCs, under certain circumstances, can create difficulties in their everyday use. A confirmation of this reality can serve as a situation in which the owner of the laptop, even though it provides the function of connecting to wireless internet , should still connect to wired. Thus, regardless of us, a computer-laptop network is created, in which a laptop is used to permanent job , and the PC - only for the Internet. This fact causes inconvenience of connecting a laptop via a network cable, so the issue of how to properly connect the Internet on a laptop through network cable ?

So, how to properly connect wired Internet to the laptop as described above. Connecting a laptop, namely an internet cable to the LAN port of the network card, is one of the simplest and obvious ways . After connecting the cable itself, you only need to configure the connection according to the provider’s requirements.

The following is a detailed understanding of how to connect the Internet on a laptop via cable. Having received the necessary settings from the provider, the user should carry out the following actions. Step by step open the windows: “Start”, then “Control Panel”, where you need to find a section called “Network and Internet”. In the window you should find the item called "Network Control Center ..." where to find the item with the words "Change network settings".

Here you need to select a section: “Connection Settings, Networks”, where you need to click on “Connection to the workplace”> “Next”. In the pop-up window, select the section under the name “Use Internet connection”> “Next”, in the line “Internet address” that appears then indicate “vpn.internet. ***. Ru”, in the line the combination “***” implies Below is the name of the service provider obtained from the network administrator.

Enter the name of the VPN connection in the “Destination Name” line, put a check mark next to “Do not connect now, set up a connection ...”, click “Next”> “Enter password and login”> “Create”> “Close”. After that, you need to click "Change adapter settings", then in the window with the name "Network and Sharing Center", you must right-click on the icon of the desired VPN connection.

Select the "Properties" section in the menu that opens, in which, in all its tabs, select the required options with a checkmark. Then select the VPN connection icon, in which specify the user name and password, save it by selecting the appropriate button. After clicking on “Connection”, after which you should mark the type of network in the next window - “ Public network ". At this connection procedure can be completed.

To increase the mobility of a laptop, you can install a Wi-Fi network using a Wi-Fi router and connect to it. On the menu Wi-Fi router at the same time it is necessary to select the module necessary settings . The sign of the module “work” is the glow of the corresponding diode on the laptop.

Setup diagram Wi-F router i: search for available connections in the “Network connections, network management” menu: “Start”> “Connection” — find the network recorded in the settings of the router from the list — select the left mouse button, then click “Connect” and enter the code set in the settings of the router. Thus, you can make sure that connecting a laptop using a Wi-Fi router is much easier.